Search > Product

AST-106 PAS Stunner Tester

Jarvis Products Corporation is introducing the Model AST 106 PAS Stunner Tester as a fast, accurate device for measuring bolt speeds on Jarvis’ Type C and Type P PAS (Power Actuated Stunner) Stunners.

Search > Product

Spring Balancers

Safety devices to prevent load dropping – due to spring breakage

Search > Product

Air Balancers

The Jarvis Model BN-003 and BN-100 pneumatically operated balancers for correctly balancing a wide variety of tools

Search > Product

SER 200/400 Reciprocating Saw

The Jarvis Models SER 200 and SER 400 — electrically powered reciprocating saws for production breaking and general purpose use. The Model SER 200 (8 in / 203 mm) and the Model SEr 400 (16 in / 406 mm) are electric saws suitable for production breaking and general purpose use on beef, hogs, sheep and veal.

Search > Product

SEC 280-4 Circular Saw

The Jarvis Model SEC 280-04 — electric powered circular breaking saw. The SEC 280-04, with a 4 inch (102 mm) depth of cut, is ideally suited for:

Search > Product

SEC 230-4 Circular Saw

The Jarvis Model SEC 230-4 — electric powered circular breaking saw. The SEC 230-4, with a 3 inch (76 mm) depth of cut, is ideally suited for:

Search > Product

SEC 180-3 Circular Saw

The Jarvis Model SEC 180-3 electrically powered circular breaking saw with indexing depth gage. The SEC 180-3, with an adjustable 2.6 inch (65 mm) depth of cut, is ideally suited for:

Search > Product

SEC 180-2 Circular Saw

The Jarvis Model SEC 180-2 electrically powered circular breaking saw. The SEC 180-2, with an adjustable 2.6 inch (66 mm) depth of cut, is ideally suited for:

Search > Product

MG-1BFQ Beef Brisket Saw

The Jarvis Models MG-1, MG-1HS, MG-1B, MG-1BHS and MG-1BFQ – hydraulic powered brisket saws for beef, hog splitting and forequartering.

Search > Product

1000-FS Circular Saw

The Jarvis Model 1000-FS hydraulic powered circular breaking saw. The 1000-FS, with a 4.75 inch (121 mm) depth of cut, is ideally suited for:

Search > Product

SHC 205 Circular Saw

The Jarvis Model SHC 205 – hydraulic powered general purpose breaking saw. The right or left handed SHC 205, with a 2.8 in (71 mm) cutting depth, is ideally suited for:

Search > Product

SHC 140/165 Circular Saw

The Jarvis Model SHC-140 and SHC-165 — hydraulic powered general purpose breaking saws. The right or left handed SHC-140, with a 1.5 in (38 mm) cutting depth, or SHC-165 with a 2 in (5 mm) cutting depth are ideally suited for:

Search > Product

MCS 300 Circular Saw

The Jarvis Model MCS 300 — multi-purpose pneumatically powered scribe saw. The MCS 300 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of:

Search > Product

MCS 260 Circular Saw

The Jarvis Model MCS 260 — multi-purpose pneumatically powered breaking saw. The MCS 260 with a full 2 hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of:

Search > Product

SPC 140/165 Circular Saw

The Jarvis Model SPC 140 and Model SPC 165 — pneumatic powered general purpose breaking saws. The SPC 140, with a 1.5 in (38 mm) cutting depth, or SPC 165 with a 2 in (51 mm) cutting depth, are ideally suited for:

Search > Product

Buster V Loin Dropper

The Jarvis Model Buster V Loin Drop — electrically powered bandsaw for beef loin dropping (quartering).

Search > Product

BS-1 Brain Sucker

The Jarvis Model BS-1 — brain sucker removal system for removing all the material in brain cavity.

Search > Product

Buster IX

The Jarvis Model Buster IX — electrically powered bandsaw.

Search > Product

Buster VI Splitting Bandsaw

The Jarvis Model Buster VI — electrically powered bandsaw for high production splitting of hogs and sows.

Search > Product

Buster V

The Jarvis Model Buster V – electrically powered bandsaw for splitting

Search > Product

Buster IV

The Jarvis Model Buster IV — electrically powered bandsaw for splitting cattle, pigs and sows

Search > Product

TBC-1 Tongue Bone Cutter

The Jarvis Model TBC-1 — pneumatically powered cutter for cutting beef tongue bones.

Search > Product

CV-1 Steam Vacuum System

For the reduction of pathogens and the spinal cord removal on beef, hogs and sheep.

Search > Product

BR-5A Blade Sharpener

For perfect dehider blade sharpening – reduced material removal and longer blade life.

Search > Product

JC-IIIA Air Dehider

A pneumatic powered dehider for skinning cattle, veal, hogs and sheep.

Search > Product

HS-1, HS-2 Hock Cleaner

Steam vacuum hock cleaning systems specifically designed for microbial reduction and the removal of contaminants.

Search > Product

30CL Hock Cutter/Dehorner

Electric-hydraulic powered (30CL-1) and pneumatic-hydraulic powered (30CL-2) fore and hind beef hock and horn cutters.

Search > Product

50-G Dehorner

An electric-hydraulic powered guillotine style dehorner.

Search > Product

Weasand Clip

For sealing the esophagus of slaughtered beef and sheep.

Search > Product

AST 102 / AST 103 Stunner Tester

The Jarvis Models AST-102 / AST-103 — testers for Jarvis’ Models USSS-2 and USSS-2A non-penetrating pneumatic stunners.