The Jarvis Models MG-1, MG-1HS, MG-1B, MG-1BHS and MG-1BFQ - hydraulic powered brisket saws for beef, hog splitting and forequartering.
- The powerful MG-1 cuts through all beef briskets quickly and easily. The high performance MG-1B is even faster, suitable for kills over 200 beef / hour. Models MG-1HS and MG-1BHS are ideal for hog splitting and hog brisket cutting. Model MG-1BFQ is the perfect aw for forequartering.
- The MG-1 and MG-1HS cuts fat cattle briskets in 5 seconds, the MG-1B, MG-1BHS and MG-1BFQS in 3 seconds.
- Small and maneuverable for optimum handling.
- A balanced drive system makes all MG-1 models smooth and quiet for less operator fatigue.
- Minimal maintenance due to the oil bath lubricated drive and no electrical components.
- Meets international requirements for safety and hygiene. USDA and CE approved.
| Model MG-1/ 1HS / 1B / 1BHS / 1BFQ Specifications: | ||
| Cutting Cycle Time | ||
| MG-1, 1HS | 5 Sec | |
| MG-1B, 1BHS, 1BFQ | 3 Sec | |
| Cut Speed at 3000 rpm (MG-1, 1HS) | 12000 in / min | 30480 cm / min |
| Cut Speed at 3500 rpm (MG-1B, 1BHS, IBFQS) | 14000 in / min | 35560 cm / min |
| Control Handle | Control Handle | Hydraulic |
| Hog Splitting 18.0 in 457 mm | Beef 9.5 in | 240 mm |
| Hog Splitting 22.0 in 559 mm | Beef 10.5 in | 270 mm |
| Forequartering 16 in 406 mm | Beef 11.5 in | 290 mm |
| Forequartering 18 in 457 mm | Beef 13.0 in | 330 mm |
| Overall Length (with 9.5 in / 240 mm blade) | 31 in | 790 mm |
| Weight | ||
| MG-1, 1B | 41 lbs | 18.6 kg |
| MG-1HS, 1BHS, 1BFQ | 63 lbs | 28.6 kg |
| Hydraulic Power Unit | ||
| Motor Power | 5 hp | 3728 W |
| Operating Voltage | 460 / 230 V, 3 phase, 60 Hz other voltages and 50 Hz available | |
| Hose Length | 16 ft | 5 m |
| Oil Capacity | 20 gal | 76 L |
| Overall Dimensions (l x w x h) | 28 x 20 x 27.5 in | 710 x 510 x 700 mm |
| Weight (without oil) | 216 lbs | 98 kg |