REICH Industry 500HD

REICH Industry 500HD

“CE” certified and “GS” tested. Separately covered saw blade in operating area. Automatic shutdown and stopping of the machine when the wheel covers are opened.

2 PARRALLE SLIDING TABLES

  • “CE” certified and “GS” tested – Complies with accident prevention regulations
  • Removable safety feed (material pusher)
  • Separately covered saw blade in operating area
  • Automatic shutdown and stopping of the machine when the wheel covers are opened.
  • Fixed welded table for better cleaning
  • Stable table with hygienic reinforcements
  • Built-in Radabstreifer – changeable without tools
  • Sägebandführung made of wear-resistant material and removable without tools.
  • Gasfederspannung of the saw blade, thereby always correct belt tension.
  • All housing parts made of stainless steel.
  • Machine design as industry 500-but with firmly welded table.

SLIDING TABLE WITH TELESCOPIC GUIDE

The cutting height is about 50 mm less than Industrie 500 standard machine. The tabletop is the support for the Telescopic table.

  • By appropriate pipes a stable guide unit is formed.
  • An this guide unit a 30 mm thick solid stainless steel shaft is mounted.
  • Through this, the table is guided and can also rotate around this shaft for cleaning or fold up.
  • In addition, two ball bearings each roll on this shaft and 4 each on the machine housing.
  • Reinforcements are completely welded to the sliding table.
  • The hand guard of the sliding table can be folded down to achieve a flat, all-round table surface.
  • With the hand guard folded down, the sliding table can no longer be moved.
  • Special dimensions can be realized at extra cost.
  • Band led by Borde in wheels, thereby no jumping off possible.
  • Self-supporting stainless steel housing – detachable stop without tools –  machine construction without the use of silicone, therefore also in the future absolutely hygienic.
  • Electrical wear-free motor brake

COMPACT DESIGN

Switch monitoring center for safety magnets. Safety magnets in separate plastic housing -large ergonomic handles for opening the doors.
  • Stainless steel chip box
  • 5 m connection cable with phase inverter plug
  • Easy-to-maintain electrical system – with standard components!
  • For three-phase current: 230/400 V / 50 Hz.
  • Connected load : 3.0 kW
  • Speed: 1500 / min.
  • Table dimensions: 880 x 900 mm
  • Table height: 950 mm
  • Cutting speed: approx. 40 meters / second
  • Cutting width: 480 mm
  • Cutting height: approx. 445 mm
  • Tape length: 3800 x 16 x 6 x 0.5 mm
  • Housing: stainless steel
  • External dimensions: 880 x 1010 x 2000 mm
  • Net weight: 295 kg
  • Gross weight: 310 kg on pallet.
To download the product brochure CLICK HERE