REICH Industry 500HS

REICH Industry 500HS

Motor stops automatically by opening of the doors or covers. With maintenance free electronic brake motor. Upper portion gauge adjustable in height.

  • “CE”-certified and “GS”-approved (complies with European hygiene and safety regulations.)
  • Motor stops automatically by opening of the doors or covers.
  • With maintenance free electronic brake motor.
  • Upper portion gauge adjustable in height.
  • Wheels scrapers installed, removable without tools.
  • Blade gauge in table specialy coated.
  • Blade gauge removable without tools.
  • Gas damper provides always correct tension of blade.
  • All parts rust free!
  • Blade guided in the wheels, therefore can not jump down from wheel.
  • The cutting height is reduced by approx. 40 mm compared to the industrial 500 standard machine.
  • The table top forms the support for the Telescopic.
  • A stable guide unit is formed by corresponding pipes.

HALF SIDE SLIDING TABLE

A 30 mm thick stainless steel shaft is mounted on this guide unit. With this shaft the table is guided and can also be cleaned by turning or lifting up around this shaft.
In addition, two ball bearings each roll on this shaft and 4 ball bearings on the machine housing. Reinforcements are completely welded to the sliding table.

The hand protection of the sliding table can be folded down to achieve a flat surface accessible on all sides.   If the hand protection is tilted downwards the sliding table can not  be moved. This fulfills the safety requirements of EC.

  • Specific dimensions can be realized at extra cost.
  •  Self-supporting stainless steel housing
  • Stop stop can be removed without tools
  • Machine construction without using silicone, therefore also absolutely hygienic in the future.
  • Electronic wear-free motor brake
  • Mechanical brake motor optional.

INTEGRATED CHUTE

  • Switch monitoring center for safety magnets.
  • Security magnet in separate plastic housing large ergonomic handle for opening the doors.
  • Stainless steel chip box
  • 5 m connection cable with phase reversing plug
  • Easy to maintain electrics  with standard components!
  • For three-phase current: 230/400 V / 50 Hz.   Power consumption: 3,0 kW
  • Speed: 1500 / min.
  • Table dimensions: 880 x 900 mm
  • Table height: 950 mm
  • Cutting speed: approx. 40 meters / second   Cutting width: 480 mm
  • Cutting height: approx. 445 mm
  • Band length: 3800 x 16 x 6 x 0.5 mm
  • Housing: stainless steel
  • Outside dimensions: 880 x 1010 x 2000 mm   Net Weight: 295 kg
  • Gross weight: 310 kg on pallet.
To download the product brochure CLICK HERE